Back in the day, pool and finish materials were not appealing and user-friendly. Thus, pool contractors and designers had to come up with ways to make the pool finish more attractive. Over the years, the pool industry’s expansion brought about a wide range of colored pool and spa finish materials. As a result, the quality of pool and spa finish materials has greatly improved over time.
It is evident that the quality of pool finish materials has continuously improved because many companies are now investing in small manufacturers of pigmented pool finish.Owner of Applied Materials Technology, Greg Garrett
Despite these significant improvements, pool designers and contractors should be careful during application. It would be best if they observe all guidelines stated by the manufacturer. Also, they should follow all the laws, as stated by the National Plasterers Council.
Causes of reduced pigmentation on different pool and spa finish materials
Not so long ago, the National Plasterers Council started releasing more information to educate more people in the pool industry. The council released information on the application and maintenance of various pool and spa finish materials. NPC also talked about the major reasons for reduced pigmentation in pool finish materials. Some of them include:
Calcium salt migration resulting from cement hydration
Calcium salt migration during hydration is the main reason for the color loss in pool finish materials. Hydration takes place when the wet finish is becoming more rigid. Often, this process takes place in the first month of application. Most colors in the pool and spa finish are specially designed to stick to their position at all times. However, during hydration, a by-product, calcium hydroxide, gets produced.
This product can settle on the material to form white deposits covering the pigment. Even though hydration can occur for more than a month, calcium hydroxide will most likely form crystalline-like deposits during the first three to seven days when the pool is getting refilled with water. So, contractors should get rid of all calcium deposits on the pool’s surface in the first five days when refiling the pool. Failure to do so would lead to the settling of calcium hydroxide on the pool finish, leading to color loss.
Surface scaling: Mineral and metal precipitation
Another cause of pigment loss on pool and spa finish materials results from surface scaling. The National Plaster Council says that most materials are prone to rust when in frequent contact with water. Also, mineral scaling can mask the pool finish pigment, hence reducing the intensity of the color. Mineral precipitation often affects dark-colored finish materials more. Discoloration of the pool and spa finish can also occur due to metal precipitation. If the pool finish gets stained from copper, it turns to green or blue. One way to avoid this issue is to check for the number of metals in the pool. If you find any metals in the pool, use the right chemicals to eliminate them.
Unhealthy water chemistry
Unbalanced pool chemistry can also lead to pigment loss in pool and spa finish materials. What happens is that harsh pool chemicals react with the pool finish material and lead to leaching. More often than not, colors from organic components are more vulnerable. This is because organic pigments have tinier particles that are lost easily. Pool experts recommend using inorganic pigments; they are more resistant to the effects of harsh pool chemicals.
How do you foster a successful pool and spa finish application?
The technique used to apply the pool and spa finish material influences the durability of the pigment. Nevertheless, most pool contractors say that you have to get a pool finish material with a quality pigment.
So, buy the pool finish from a dependable manufacturer. As mentioned earlier, it would help if you settled for inorganic pigments. Also, allow the manufacturer to address all your queries, doubts, and fears. Ensure that the material is compatible with your pool.
Moreover, pool designers and contractors should ensure the product has been in the industry for more than two years. During application, ensure you mix the pigment thoroughly such that it dissolves into the material. After application, refill the pool immediately to avoid any cracks and shrinkage.
Fixing concrete patches
Pool contractors should be extra careful when patching colored concrete. President and owner of Olympic Pool Plastering, Shawn Still, says, “It is difficult to patch colored concrete, especially when you don’t know what took place during the original application.”
Nonetheless, you can always find the nearest match by cleaning the surface with an acid solution before patching. “This helps in knowing the original colors,” Shawn says. Besides, doing this helps you identify almost all the conditions that were present during the initial application. Once you do this, start adding color to the surface until it matches the original. In case the color becomes too light, continue adding pigment. On the flip side, if the color is too dark, apply cement to lighten the surface.
At the end of the day, you will have fixed the patch correctly. Shawn says that he is keen to observe and take notes on the exact pigment amount he used.
Stainless Steel Spas With Diamond Spas – A Legacy of Excellence
If you’re dreaming of transforming your backyard into a modern oasis of relaxation and style, look no further than Diamond Spas. Specializing in stainless steel pools and spas, Diamond Spas brings a touch of elegance and innovation to your outdoor space. Let’s dive into the fascinating history of this renowned company and explore the remarkable benefits of their stainless steel creations.
Diamond Spas: Premium Manufacturers of Stainless Steel Spas
Diamond Spas has a rich history that dates back over two decades. Founded in 1996 by Stephanie Bennett, the company set out to redefine the concept of luxury aquatic living. Stephanie’s vision was to create high-quality, sustainable, and customizable stainless steel pools and spas that would elevate the backyard experience for homeowners.
Since its inception, Diamond Spas has become a trailblazer in the industry, pushing boundaries and setting new standards for design and craftsmanship. With an unwavering commitment to quality and innovation, the company has earned a reputation as the go-to source for discerning homeowners seeking the pinnacle of luxury and durability in aquatic features.
Advantages of Stainless Steel
Stainless steel pools and spas offer a multitude of advantages that set them apart from traditional options. While they may be relatively new to North America, stainless steel aquatic features have long been favored in Europe, particularly in municipal and public settings.
One of the primary benefits of stainless steel is its hygienic properties. Unlike other materials, stainless steel is non-porous, which means bacteria and germs cannot penetrate its surface. This results in superior water quality and simplified maintenance, ensuring a safe and enjoyable experience for swimmers and bathers.
Furthermore, the entire range of accessories, such as steps, rails, and benches, are all crafted from stainless steel, providing a cohesive and visually stunning aesthetic. With no risk of discoloration or degradation over time, your Diamond Spas pool or spa will maintain its pristine appearance for years to come.
Environmental Friendliness and Adaptability
In addition to its inherent beauty and functionality, stainless steel is an environmentally friendly choice. Unlike traditional materials, such as concrete, plastic, or vinyl, stainless steel is fully recyclable. By choosing a stainless steel pool or spa from Diamond Spas, you’re making a sustainable choice that minimizes your environmental footprint.
Stainless steel is also ideal for various climates, including cold regions. Their frost-resistant properties ensure year-round enjoyment, even in harsh winter conditions. With their lightweight and free-standing design, these installations can be quickly and easily installed, tailored to your specific needs and preferences.
Invest in Long-Term Luxury
While stainless steel pools and spas may come with a higher upfront cost compared to other materials, they offer long-term value and savings. The durability and low-maintenance nature of stainless steel significantly reduce the need for frequent repairs, replacements, and costly upkeep.
When you choose Diamond Spas, you’re investing in a top-of-the-line, luxurious addition to your home that will stand the test of time. The unparalleled craftsmanship and attention to detail ensure that your stainless steel pool or spa will remain a statement of luxury and refinement for years to come.
Immerse Yourself in Luxury
Diamond Spas offers a wide range of exquisite pools and spas that can be customized to suit your unique taste and space requirements. Whether you envision a sleek and modern pool with clean lines or a luxurious hot tub with strategically placed jets, Diamond Spas has the expertise to bring your vision to life.
Their skilled craftsmen meticulously handcraft each pool and spa using the highest quality stainless steel materials. This ensures not only exceptional durability but also a stunning visual appeal that will enhance the overall aesthetics of your outdoor area.
Unmatched Durability and Low Maintenance
One of the standout features of stainless steel pools and spas from Diamond Spas is their remarkable durability. Unlike traditional pool materials that may crack, fade, or deteriorate over time, stainless steel stands the test of time. It is resistant to corrosion, staining, and damage from harsh weather conditions, ensuring that your investment remains in pristine condition for years to come.
In addition to its durability, stainless steel is incredibly low maintenance. Its non-porous surface prevents the growth of bacteria and algae, reducing the need for frequent cleaning and chemical treatments. This not only saves you time and effort but also minimizes the use of harsh chemicals, making it a healthier choice for you and the environment.
Aesthetic Elegance and Customization
When it comes to design possibilities, Diamond Spas leaves no stone unturned. Their products can be customized with various features, including built-in seating, integrated lighting, waterfalls, and unique shapes. Whether you desire a lap pool for fitness purposes or a cascading hot tub for ultimate relaxation, Diamond Spas can turn your dreams into reality.
Moreover, stainless steel’s inherent reflective properties create a stunning visual effect, amplifying the beauty of your surroundings. It seamlessly blends with any architectural style, from contemporary to rustic, elevating the overall ambiance of your outdoor space.
A Commitment to Sustainability
Diamond Spas takes pride in their commitment to environmental sustainability. By choosing a stainless steel pool or spa, you are making an eco-conscious decision. Stainless steel is 100% recyclable, making it a responsible choice for those who prioritize sustainability and want to minimize their carbon footprint.
Additionally, stainless steel pools and spas require fewer resources for maintenance and repairs compared to traditional options. This translates to reduced water usage, energy consumption, and waste generation. By investing in a Diamond Spas stainless steel pool or spa you are not only enhancing your lifestyle but also contributing to a greener future.
Preventing Hard Water Issues In Your Spa
Indulging in a relaxing soak in a spa is a delightful experience that can rejuvenate both the body and mind. However, there is an often-overlooked factor that can impact your spa experience: hard water. In this article, we explore the effects of hard water in spas and how it can affect your relaxation oasis.
Understanding Hard Water
Before delving into the specifics of hard water in spas, let’s clarify what hard water actually is. Hard water refers to water that contains high mineral content, primarily calcium and magnesium. While these minerals are not harmful to human health, they can cause several undesirable effects in certain environments, including spas.
Hard Water in Spas
Spas, especially those that use traditional water filtration systems, are susceptible to the negative effects of hard water. When hard water is heated and circulated through the spa’s plumbing, the minerals present in the water tend to precipitate and accumulate on various surfaces, including the walls, jets, and heating elements of the spa.
The Consequences of Hard Water
- Scale Buildup: The mineral deposits left behind by hard water can form unsightly white scale buildup on the spa’s surfaces. This can diminish the aesthetic appeal of the spa and require regular maintenance and cleaning to prevent excessive scaling.
- Skin and Hair Concerns: Hard water can leave a residue on the skin and hair, potentially causing dryness, irritation, and dullness. The minerals can strip away natural oils, leading to skin dryness and hair brittleness, which can detract from the overall experience of a spa session.
- Reduced Efficiency: The accumulation of minerals can also hinder the efficiency of the spa’s components, such as jets and heating elements. Over time, the reduced water flow and compromised heat transfer can impact the performance of the spa, resulting in decreased relaxation and enjoyment.
- Chemical Imbalance: The presence of minerals in hard water can interfere with the effectiveness of water treatment chemicals. It may require higher doses of sanitizers and pH balancers to maintain optimal water chemistry, increasing the cost and effort involved in spa maintenance.
Preventing and Treating Hard Water Issues in Spas
To mitigate the negative effects of hard water in spas, there are several steps you can take:
- Water Softeners: Installing a water softener system can help remove or reduce the mineral content in the water before it enters the spa. This significantly reduces the chances of scale buildup and enhances the overall performance and lifespan of the spa.
- Regular Maintenance: Implementing a regular maintenance routine is crucial for addressing hard water issues. Regularly cleaning the spa, including its jets and surfaces, can help prevent mineral accumulation and scale buildup. Additionally, using appropriate cleaning agents designed for spas can assist in maintaining optimal water chemistry.
- Filtration Systems: Consider upgrading to a spa with advanced filtration systems that are specifically designed to handle hard water. These systems often incorporate innovative technologies that help minimize scale buildup and prolong the life of the spa’s components.
While indulging in a spa can be a wonderful way to unwind and relax, the impact of hard water cannot be ignored. Understanding the consequences of hard water and taking proactive measures to prevent and treat it can help ensure that your spa experience remains consistently enjoyable. By employing water softeners, adhering to a regular maintenance routine, and considering advanced filtration systems, you can mitigate the effects of hard water, allowing you to immerse yourself in the soothing oasis of your spa without any unwelcome surprises.
Featured Photo Credit: Master Spas
Plug N’ Play Spas – Is One Right For Your Backyard?
For those seeking the therapeutic benefits of hydrotherapy without the hassle of additional electrical requirements, plug n’ play spas offer an enticing solution. But what exactly is a plug n’ play spa, and how does it differ from traditional portable hot tubs? In this article, we will explore the concept of plug n’ play spas, their unique features, and the benefits they bring to the table.
Advantages of Plug n’ Play Spas
Owning a plug n’ play spa comes with several notable advantages. One of the key benefits is the ease of installation and setup. Simply plug in the spa, fill it with water, heat it up, and you’re ready to enjoy a soothing soak. Unlike traditional hot tubs, plug n’ play spas are not hardwired into a permanent outside GFCI box, which means they can be easily moved to a new location on your property if you decide to rearrange your backyard retreat. This feature is particularly beneficial for renters who seek the health and relaxation benefits of a portable spa but lack the option to run new electrical wiring.
Pros of Plug n’ Play Spas:
- Easy Installation: Plug n’ play spas require minimal setup and can be installed quickly. Simply plug them into a standard 110V power outlet, fill them with water, and start enjoying the benefits of hydrotherapy.
- Portability: Unlike traditional hot tubs that are hardwired, plug n’ play spas are not permanently installed. They can be easily moved to different locations within your property, providing flexibility and convenience.
- No Additional Wiring: One of the significant advantages of plug n’ play spas is that they do not require additional electrical wiring. This eliminates the need for hiring an electrician and reduces installation costs.
- Rental-Friendly: If you’re renting a property, plug n’ play spas are an excellent option. Since they don’t require permanent installation, you can enjoy the benefits of a spa without making modifications to the electrical system of your rental home.
- Lower Cost: Plug n’ play spas generally have a lower upfront cost compared to traditional hot tubs. The reduced installation expenses, absence of electrical modifications, and simplified setup contribute to their affordability.
Cons of Plug n’ Play Spas:
- Limited Performance: Plug n’ play spas typically operate with a single pump at a time due to their lower voltage requirements. This may result in slower heating of the water and potentially lower pump power compared to higher voltage options.
- Limited Features: Some advanced features found in traditional hot tubs, such as multiple pumps, specialized jet configurations, and integrated audio systems, may be limited or not available in plug n’ play spas.
- Longer Heat-Up Time: Due to their lower voltage, plug n’ play spas may take longer to heat the water to the desired temperature, especially when initially filled with fresh water. Patience may be required before the spa is ready for use.
- Electrical Limitations: Since plug n’ play spas run on standard 110V power, the electrical capacity may limit the overall performance and functionality of the spa. For those seeking a more robust and customizable spa experience, higher voltage options may be more suitable.
- Potential Compatibility Issues: Some older homes or properties with outdated electrical systems may not be compatible with plug n’ play spas. It is essential to ensure that your electrical infrastructure can support the power requirements of the spa before making a purchase.
It is worth noting that the pros and cons listed above may vary depending on the specific make and model of plug n’ play spas, as well as individual preferences and circumstances. It’s always recommended to thoroughly research and consider your needs before deciding on the type of spa that best suits you.
Understanding Power Requirements
Before delving into the specifics of plug n’ play spas, it is important to understand the power requirements of hot tubs in general. Whether it’s a traditional or plug n’ play spa, a power source is necessary to operate the jets, heat the water, and perform other functions. Typically, hot tubs require either 120V or 240V electrical hookup. While most hot tubs necessitate a 240V connection, plug n’ play spas are designed to run on standard 110V power, which can be conveniently plugged into most household power sources without the need for additional wiring.
Considerations for Performance
While the 110V electrical requirements of plug n’ play spas may result in a lower installation cost, it’s important to understand the potential performance differences. Models designed to plug into regular three-pronged exterior outlets typically operate with a single pump at a time. This means that heating the water may take a bit longer compared to higher voltage options. Additionally, there may be a slight variance in pump power. However, renowned brands like Sundance® Spas maintain a balanced ratio of jets to pumps, ensuring an enjoyable massage experience.
Regardless of the electrical option you choose, plug n’ play spas still offer a range of benefits. These may include patented Fluidix® Jets found in most series, seats that provide unparalleled comfort, and water management systems that simplify spa ownership. If you have any lingering questions about plug n’ play spas or need guidance in choosing the best hot tub for your needs, Sundance® Spa dealers and buying guides are excellent resources to help you make an informed decision.
Is a Plug N’ Play Spa Right For Me?
Plug n’ play spas have revolutionized the hot tub industry by offering a convenient and cost-effective solution for enjoying hydrotherapy. With their ability to operate on standard 110V power, these spas eliminate the need for additional wiring and make installation a breeze. While there may be slight performance differences compared to higher voltage options, the benefits of owning a plug n’ play spa, including ease of setup and flexibility in relocation, make them an appealing choice for many. So, if you’re seeking a hassle-free and rejuvenating spa experience, plug n’ play spas might be the perfect fit for you.
Hot Tub Repair Man Accused Of Burglary
Spa Parts Experts Adds Popular Spa and Hot Tub Brands to its Offerings
Canadian Spa Brands Merge – Hydropool + Sunrise
Greenstory Global Pool & Spa Filtration Announces The Launch Of Their Complete New Line of Clorox® Pool & Spa Filters
Building a Successful Pool and Spa Business
Technology in the Pool and Spa Industry
Spa Parts Experts Adds Popular Spa and Hot Tub Brands to its Offerings
Spa Parts Experts is undoubtedly relentless in delivering premium quality parts to meet the spa and hot tub needs of...
King Technology: The EPA Helps Protect Residential Pools & Hot Tubs
MINNEAPOLIS, May 4, 2023 /PRNewswire/ — King Technology: frogproducts.com Online purchasing has a dark side. Learn to check for EPA registration when buying...
Bullfrog Spas Unveils New Premium Clear Comfort AOP System
The All-New Bullfrog Spas Offering Leverages the Market-Leading CCW25 AOP System From Clear Comfort
Master Spas Becomes Official Partner of U.S. Masters Swimming
SARASOTA, Fla. — Master Spas has become an official partner of U.S. Masters Swimming, the two organizations announced on Tuesday. Master...
Bullfrog Spas Launches the New 2023 A Series Line of Hot Tubs
Innovative hot tub manufacturer, Bullfrog Spas, brings to market their all-new A Series line highlighting exclusive technologies, updated designs, and...
Certified Pool & Spa Operator Certification Program Celebrates 50th Anniversary
(Alexandria, Va.) – The Certified Pool & Spa Operator (CPO) certification program is celebrating its 50th anniversary in 2023. In...
Ken Howard Joins Pool & Spa Apprenticeship & Training Committee
The Pool & Spa Apprenticeship and Training Committee is excited to announce another newly appointed Director to the Pool &...
Master Spas Continues Support of St. Jude Children’s Research Hospital as Charity Partner of Warburton Golf Tournament
Fort Wayne, IN – Master Spas, a leading manufacturer of premium hot tubs and swim spas, continued its support of...
Master Spas Sponsors Broadcast of Annual Bart Starr Award Presentation
PHOENIX, Feb. 16, 2023 /PRNewswire/ — Master Spas, a leading manufacturer of hot tubs and swim spas, is the proud broadcast sponsor...
Master Spas Names Terry Valmassoi as President & CEO
FORT WAYNE, Ind., Feb. 7, 2023 /PRNewswire/ — Master Spas, a leading spa manufacturer, recently announced that Terry Valmassoi has been named president and...
Industry News From Pool Magazine
- Acid washing freshly placed plaster is one of the most destructive things you can possibly do to the surface of […]
- Let’s face it… quality help is hard to find. You cannot have quality pool construction without quality people, either direct […]
- Owning a pool can be a delightful addition to your home, offering endless hours of relaxation and enjoyment during the […]
- Murrieta, California, September 25, 2023 – IPS Controllers, a leading innovator in the manufacturing and marketing of chemical automation controllers, […]
- Water Tech Corp, manufacturer of the original Pool Blaster, as well as popular Volt and Precision cordless and hose-less pool […]